Toro 5000 Series RD 60" 25HP EFI 747cc (74943)
Call for Price
Key Features
Availability
Call For Price and Availability
MakeToro
Model5000 Series RD 60" 25HP EFI 747cc (74943)
Product Features
Description
Z Master Professional 5000 Series mowers offer rear discharge decks for increased productivity in taller grass. These EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.
Highlights
- 25 HP (20 kw) Kohler® Command Pro® EFI 747cc Engine
- 60" (152.4 cm) TURBO FORCE deck
- EFI Fuel Efficiency - Kohler's closed-loop EFI design improves fuel efficiency by up to 25 percent.
- The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds.
Features
- Industry's Toughest Spindle Assemblies: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models. 72" Deck will have tapered bearing only.
- 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
- A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
- Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
- Deluxe Suspension Seat: Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
- Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
- Smooth, Powerful Response:
- Operator Information Center:
Specifications
- Engine: 25 hp (20 kw) Kohler® Command Pro EFI 747cc
- Fuel Capacity: Gas/12 gal (45.4 L)
- Cutting Width: 60" (152.4 cm)
- Adjustable Discharge Baffle: Standard
- Air Filter: Heavy-Duty Canister Air Cleaner
- Armrests: Standard
- Blade Tip Speed: 18,500+ ft/min (5638.8 m/min)
- Blade Type: .25 in (.6 cm) thick heat-treated steel
- Carrier Frame: 3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
- Caster Tires: 13" X 6.5" - 6" (33 cm x 16.5 cm - 15.2 cm) Flat-Free Semi-Pneumatic
- Clutch: Electromagnetic
- Cup Holder: Standard
- Deck Design: 7-gauge 60" (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
- Discharge Chute: Rubber
- Drive System: Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
- Drive Tires: 24" x 12" - 12" (61 cm x 30.5 cm - 30.5 cm)
- Ground Speed: 10 mph forward (16.1 kph)
- Height of Cut: 1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
- Number of Blades: 3
- Hour Meter: Standard
- Hydraulic Fluid: Premium synthetic
- Ignition: Electric
- ROPS: Folding; standard
- Seat: Deluxe Suspension with 3-D isolation mounts
- Spindle Bearings: Maintenance-Free
- Spindle Housing: 9" (22.9 cm) diameter cast iron
- Steering Controls: 1-5/8" (4.1 cm) diameter grips; adjustable, dampened
- Weight: 1,271 lbs. (576.5 kg)
NOTES:
*The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.Engine
Engine Manufacturer | Kohler® |
Horse Power | 25 hp |
Engine Type | Command Pro EFI |
General
Transmission | Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir) |
Wheel Size | 24 in. x 12 in. - 12 in. (61 cm x 30.5 cm - 30.5 cm) |
Fuel Capacity | 12 gal. (45.4 L) |
Deck
Deck Size | 60 in. (152.4 cm) |